Connect the scale to a serial (COM) port of the PC, open Hardware, the Scale card, choose its kind and port, and press Test with something on the platter. A labelling scale that prints barcodes needs no connection: its labels are scanned.
A scale read by the till
- Connect the scale’s cable to a COM port, or to a USB-to-serial adapter.
- Open Hardware and the Scale card.
- Choose the Type: the protocol your scale speaks (CAS, Toledo, generic) or OPOS, and the port with its speed settings from the scale’s manual.
- Brand / model fills in usual settings for common makes. Detect devices can also find the scale by listening on the ports: see How do I let the till find and set up my devices?.
- Put something on the scale and press Test. The till shows the weight.
kg or lb
Scale reports in is used when the scale sends a weight without naming the unit: Automatic (store measurement system), kg or lb. Weights sent with kg, g, lb or oz are always read as sent.
Messages
No stable weight: the scale answered, but the weight was still moving or was zero. Wait until the scale is steady. No answer at all means the wrong port, speed or cable.
A labelling scale
A scale that prints its own price labels is not connected. Tell the till how its barcodes are built, once: see How do I make the till read the weight or price labels of my labelling scale, and set the containers for tare?.
Selling by weight is regulated in most countries: the scale must be an approved type and may need periodic verification. That is between the store and the local weights and measures office; the till only reads what the scale sends.
For: Owner Shop / supermarket Café / restaurant Clothing since version 1.0.0
Did this help?
Thank you. Your answer helps us improve the help.