How do I let the till find and set up my devices?

Open Hardware and press Detect devices. The till looks for receipt and label printers, a second screen, point-of-sale devices on USB and, if you agree, a scale. It lists what it recognised with a tick box each; tick what to set up and confirm.

  1. Connect the devices, switch them on, and install the Windows driver of each printer first.
  2. Open Hardware and press Detect devices.
  3. The till searches and shows a wait message with a Cancel button. Stopping changes nothing.
  4. It asks whether to listen on the COM ports for a scale, for a few seconds. Put something on the scale if you answer yes.
  5. Under Suggestions, each device found has a tick box: a receipt printer with the cash drawer through it, a label printer, a customer display or second screen, a scale.
  6. Tick what you want and press Set up the ticked devices.
  7. Test each device from its card: see How do I test all the devices of the till in one place?.
  • Show the full detection report lists everything Windows reports: COM ports, printers, keyboard devices (USB scanners show here), webcams and screens.
  • Nothing new to set up. Printers need their Windows driver installed first; scales and pole displays need their COM port. means exactly that: install the driver, or check the cable.
  • A new till sets up a recognised receipt or label printer by itself at its first start.
  • A USB scanner that types like a keyboard needs no setup at all.

For: Owner since version 1.0.8

Did this help?

Print this article · Contact support