Install the printer's Windows driver, then open Hardware, the Printer card. Choose how it is connected, the paper width, and press Test. For a printer on the network, type its address and the port 9100.
- Install the printer in Windows with its driver, or connect it to the network.
- Open Hardware and the Printer card.
- Choose the Type:
- Windows printer (Spooler): pick the printer from the list of Windows printers;
- IP / host (Tcp) with the TCP port (usually 9100): for a network printer;
- a serial port with its speed settings.
- Set Paper width (mm): 58 or 80 mm.
- Brand / model fills in the usual settings of common makes.
- Save and press Test. Check the paper: the text in the three languages is readable, the barcode and the QR code scan, and the paper is cut.
Arabic and other scripts
Leave Print Arabic as image (works on every printer) ticked: the till then draws Arabic text itself and sends it as a picture, so it prints correctly on printers without Arabic fonts. Code page (437 default, 864/1256 Arabic) matters only if you untick it.
More