IRONLOOM POS

The scanner does nothing, types into the wrong box, or scans the wrong product. What do I check?

For version 1.0.46 ยท 11/2026

First scan a barcode into Windows Notepad: if digits appear there, the scanner is fine and the setting is in the till; if nothing appears, the problem is the scanner, its cable or its own settings.

Nothing happens at all

  1. Unplug the scanner and plug it into another USB port.
  2. Open Windows Notepad and scan a barcode. No digits: the scanner itself is at fault. Check the cable, or scan the "factory default" and "USB keyboard" codes in the scanner's leaflet.
  3. Digits appear in Notepad but not in the till: go on below.

It beeps, but the till does not react

It types into the wrong box

The scanner is seen as a keyboard, and the cursor was in another box. Teach the till the scanner with Learn USB scanner (scan now): a learned scanner is read directly and never types into a box.

The barcode is "not known" although the product exists

It adds the product twice

The scanner reads the same label twice in a row when held too long. Most scanners have a "same code delay" setting in their leaflet.