Look at the dot next to the receipt printer at the bottom of the screen, then run the test in Hardware. The usual causes are paper, a cable, the printer being off, simulators switched on, or receipts set to "never".
Check in this order
- The printer: is it on, with paper, the lid closed and no red light? Switch it off and on.
- The cable: USB or network cable firmly in at both ends.
- The dot next to the receipt printer in the line at the bottom of the till: a filled dot means the till sees it as ready.
- Simulators: open Hardware. If the first tile says every device is simulated, receipts go to the screen, not to paper: see What are simulators, and why does nothing really print?.
- The setting: Settings, Receipt: is printing set to never, or to ask? See How do I change what is printed on the receipt?.
- The test: Hardware, Test hardware, Print a test receipt: see How do I test all the devices of the till in one place?.
- Windows: print a Windows test page to the same printer (Windows Settings, Printers). If Windows cannot print either, the driver or the printer is at fault, not the till.
It prints, but wrongly
| What you see |
What to do |
| Strange characters, or pages of them |
the printer is not an ESC/POS printer, or the wrong kind is chosen in the Printer card |
| Arabic as question marks or boxes |
tick Print Arabic as image (works on every printer) |
| Text cut off at the right |
wrong Paper width (mm): 58 or 80 mm |
| Blank paper |
thermal paper is in upside down: turn the roll |
| No cut |
the printer has no cutter, or needs its own setting |
| No QR code |
untick Native QR in the Printer card |
The sale itself is safe when a receipt fails to print: reprint it once the printer works: see How do I print a receipt again?.