IRONLOOM POS

How do I use more than one till in the same store?

For version 1.0.46 ยท 11/2026

Choose one PC as the master. On it, set Multi-till sync to master with a shared secret. On each other till, set Multi-till sync to till and enter the master's address and the same secret. Each till then sells on its own and exchanges data with the master over the store's network.

The master

  1. Install Ironloom POS on the PC that will be the master, usually the back-office PC, with the option that allows other tills to connect ticked: see How do I install Ironloom POS?.
  2. Open Settings, Multi-till sync, and choose Master PC.
  3. Set the Master port (8787 unless you have a reason to change it) and a Shared secret: a long word only your tills know.
  4. Save.

Each till

  1. Install Ironloom POS on the till PC and go through the first-start setup.
  2. Open Settings, Multi-till sync, and choose Till.
  3. Type the master's address in Master URL, for example http://192.168.1.10:8787/ironloom, and the same Shared secret.
  4. Press Test connection. It should answer Master reachable.
  5. Press Download catalogue from master to download the catalogue, customers, users and promotions from the master. Local copies on the till are overwritten.
  6. Save. The till now sells by itself, sends its sales to the master and picks up changes at the interval set in Sync every N seconds. Sync now does it at once.

Rules

If Test connection fails: check that both PCs are on the same network, that the address and port are right, that the secret is identical, and that the Windows firewall on the master allows the program.